As can be seen by its English name airlaid www.lyxscl two main characteristics: First, the raw material for wood pulp fibers; the second is the use of airlaid technology. Nonwovens production process is mainly into two processes and mesh reinforcement. Airlaid nonwovens production of major chemical bonding and thermal bonding methods. Depending on its reinforcement process, the raw materials and use different, as described below, respectively. The latter, chemical bonding chemical bonding with 100% wood pulp fibers (fluff pulp) as raw material, opening into a single fiber state of a fiber by the air-laid to the water-soluble binder spraying method is sprayed onto the web surface, and then baking reinforcement into cloth. The main use of the product for industrial wipes, feminine hygiene products, baby wipes, cloth, wet towel and cooking cloth. Second, the thermal bonding thermal bonding is mixed with heat-fusible fibers in fluff pulp fibers, mixed in the ratio of generally not less than 15%, after airlaid, by hot air or hot rolling so that the low melting point fiber web melting The fiber mesh reinforcement into cloth. Thermal bonding nonwoven fabric because no chemical binders, product bulkiness, hygroscopicity and better, mainly used for the high-absorbent hygiene products the absorbent core, thin sanitary napkins and the like. For this purpose, some production line equipped with a high absorbent resin (SAP) powder applying means. Due to join the super absorbent polymer, after absorbing water can become solid bar, greatly enhancing its absorption capacity.